Auto Drawing Head - Wall User Guide

Please follow the below steps to load the .dll file

Step 1

Type “NETLOAD” in AutoCAD command line and press enter.

Step 2

Select the .dll file and click on “open” button. (Refer this image)
HEAD Wall Image

Step 3

Click on “Always Load” button. (refer this image)

Step 4

Type “PGT_HEAD_Wall” in AutoCAD command line and press enter.
“PGT_HeadWall” tab created in AutoCAD menu.

Step 5

Click on “Head Wall” button

Step 6

Open the tool, following image shows the user-interface of the tool.
Step 7 - Input Data

7.1

Head wall Type – There are two options in head walls as per their sizes small and large with the condition, with or without Toe beam.
Image 7.1

7.2

Opening Type – Here we have provided 2 opening types in head wall i.e. Circular and Rectangular.
Image 7.2

7.3

User can add Handrail as per the requirements.

Image 7.3

7.4

Drawing Output – In this drawing output we have provided 2 options that are “All” and “Only 3D”. In “All” option we can create Plan, Elevation, and section views along with 3D view or either only 3D view can be created by selecting “Only 3D” option. Also, we can calculate centre of gravity, weight, and area in mm or in cm through the drawing unit option.

Image 7.4

7.5

Plan – In Plan option we can defined the lifter mark and its location as per the requirements.

Image 7.5

7.6

User interface of the Extract Previous Input Data.

Image 7.6

Step 8

After giving all the input, click on the create button.

Image 8.1

Output

2d View
3D View
Contact US